The switch will now boot to the new firmware from the TFTP Server and automatically save the new firmware to the flash memory. Save the settings again by pressing the + keys. If there appears to be no problem with the firmware flash, navigate back to the System Manager/Firmware Upgrade menu and change the Next Boot From: option to Net & Save. If there appears to be any problem, try downloading another copy of the firmware file and re-flash with the new file. Once the switch has booted, verify that the Firmware Upgrade menu now displays the new firmware version and verify that the firmware file is not corrupt by navigating through a couple of menus. Once the TFTP Server establishes a connection, it will output status information and errors to the main application window as seen in Figure 4. The switch will attempt to boot from the TFTP Server. Press the key to navigate back to the System Manager menu and then select the Reset option. If the file is in another folder, input the path from the TFTP root directory. Highlight the option for Next Boot From: and press the to change the setting to Net (the default is Last Saved).įor the TFTP Server IP address option, input the IP address of the system running the TFTP Server application (this will also be shown in the bottom right-hand corner of the main TFTP Server application window).įor the TFTP Path/Filename option, input only the filename. Unzip the file and place the firmware binary file (RDUx_604.fir) in the root directory of the TFTP Server (C:\TFTP-ROOT by default).Ĭonnect to the management interface of the switch using a terminal emulation program (HyperTerminal Private Edition, Tera Term, etc.)īrowse to the System Manager/Firmware Upgrade menu. NOTE: If the application window is closed, the TFTP service will be stopped.ĭownload the firmware from the Dell Support site located at The filename for the 6.0.4 firmware is 604firm.zip. ( Figure 2)įigure 2 - TFTP Server Transmit and Receive Files Configuration Option.Ĭlick OK to save the settings, but leave the main TFTP Server window open. On the Security tab of the Configuration options, select Transmit and Receive files.Click File on the menu bar then select Configure on the pull down to access the Configuration options. NOTE: If you wish to change the default root directory, you can do so from the TFTP Root Directory tab of the Configuration options. By default, this will be the root directory of the TFPT server. The first time it is run, it will create a folder on the root of the C: drive called TFTP-ROOT. Download the TFTP server software from and install the program.The switch does not initialize the fiber ports fast enough to allow the switch to boot from the TFTP Server on the other side of the fiber. NOTE: A firmware update across a fiber uplink is not possible. TFTP Server system configured with a static IP address and netmask.System running a TFTP Server application connected directly to the switch via console (null modem cable) and Ethernet (Category 5 or higher).Single switch (not in a stacked configuration) configured with a static IP address and netmask.MP3 to CD, CD to MP3.Ensure the following criteria are set and correct prior to starting the process: Plugs into Outlook.ĬDex - excellent encoder. Not as refined, but it’s free and allows portability of documents from MS Office to Open Office.ĬlamWin - Open Source AV software. Don’t want to buy MS Office? This is the open source version. TightVNC - Server/Client freeware allows you to remotely operate a machine as if it had a terminal server on it. I use it to sync between my Desktop, Thumbnail Drive, and Laptop. IP Scan - htp://Use it to scan your network for active IP’s, or if you have a device that was pulled and you don’t know the password, but have an idea what subnet it came from, you can put your computer on the same subnet and scan the network range to determine the IP. When they are trying to figure out an issue with their network, they will thank you for it. Single Click Home Network Manager - Install this eval copy on your client’s computers and recommend they pay the 40 bucks. Trillian Chat Client - works with all Chat types, clean interface. Open platform, works with other SIP VoIP platforms including Google Talk. Does not use your machine as a router like Skype. Solid FTP server runs on any windows machine Runs on Win ServerįileZilla Server and Client - Free. SNMPv2 for managing Canopy Networks with web-based monitoring - free trial. I’ll share some of mine, share some of yours. So I was thinking that alot of us have useful tools and software that make life easier.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |